Artesive Glass Series – G-04 Square

SKU: ART-G-04 Category:

from 4,49

Livraison gratuite pour ordres supérieurs à 100€

Livraison rapide dans les 24 à 48 heures

Retour produits facilité dans 30 jours


Livraison gratuite pour ordres supérieurs à 100€

Livraison rapide dans les 24 à 48 heures

Retour produits facilité dans 30 jours


The Square model combines the decorum of a modern design to the value of privacy window film. The blurring degree is lower, a short distance you can distinguish what is on the other side of the glass. At a distance of 1 m, you can only identify the silhouettes of things or persons, while at a distance of 5 m is not able to distinguish nothing of  which is located beyond the glass. Thanks to the lower degree of blur, the light filters almost completely. Each of the decor square measures approx 75mm of width. One of the images shows a comparison with uncoated glass.

Choose your Roll

Choose the width you need to minimize waste and facilitate application. You can choose between the various pre-cut rolls or the customized roll by indicating in the quantity field the exact meters required. This model is available in 2 different widths. 50 cm and 100 cm.

Glass Series

With Glass Series Artesive wants to introduce our window films, for decoration and privacy, for use on all glass and transparent surfaces (ie. Plexiglass). Ideal for your privacy protection, it also create a decorative effect on home and office windows. The Glass series window films also offer protection in case of accidental glass breakage.  It is also possible to cut the window film to a shape or design using a standard vinyl cutter.

Blurring your glass has never been so easy

Easy application thanks to PVC increased thickness and length are the two cornerstones of the Glass Series The product is suitable for many applications in the home and in commercial spaces, perfect to let in natural light while obscuring from view. There are various levels of obscurity depending on which model you choose.

See the diagram below for some of the performance normally required by an adhesive coating for interiors. On a scale of 0 to 100 where 100 is the highest score, you can figure out which model is suitable for your use.

Performance Série Glass Square

  • Protection de la vie privée 50% 50%
  • Facilité d’application 80% 80%
  • Protection casse du vitrage 80% 80%
  • Étanchéité Adhésive 90% 90%
  • Filtrage lumière 85% 85%
  • Utilisation avec table de découpe 100% 100%
  • Usage Externe 20% 20%
  • Résistance Aux Produits de nettoyage 80% 80%

Caractéristiques Série Glass Square

Vie privée

Opacifiez votre verre et protégez-le de votre intimité en laissant filtrer la lumière naturelle.


Grâce à l'épaisseur accrue, les pellicules de la série Glass sont plus faciles à appliquer, il suffit de suivre les instructions pour une installation simple et rapide.

Protection contre le bris de verre

Grâce aux pellicules de la Série Glass vous réduisez le risque de formation d'éclats en cas de bris de verre accidentel.

Possibilité de coupage avec traceur

L'épaisseur de 90 microns les rend également utilisables pour la découpe avec des traceurs. Une façon de créer des dessins et des écritures pré-espacées.

How to apply a window adhesive film
After taking measurements of the surface of the glass to be coated, cut the film using the measurement grid on the back, leaving at least 5cm of margin at each side.
Wipe the surface to be coated with a cloth, removing any imperfections and dirt which, in contact with the film, could cause imperfections.
Using a sprayer containing a solution of water and diluted neutral soap (10ml per liter of water), wet the glass to be coated thoroughly.
Remove the back paper of your Artesive glass film. While removing the film, moisten the adhesive part, always using the sprayer with the soapy water solution to prevent the film from sticking anywhere. Do not be afraid to moisten the film too much.
Apply the dampened film on the glass surface, leaving at least 5 cm of margin on all sides. Thanks to the wet glass the film will not immediately make adhesion and will allow you to move it without difficulty. Do not worry about any bubbles but focus only on positioning.
Hold the film firmly with one hand, using the Robin trowel or a soft spatula, remove the underlying water from the center of the surface to the outside. Follow the pictogram arrows and make sure to completely remove the water. During this phase also the possible air bubbles join the drops of water and are easily removed.
Dry with a cloth along the edges of the surface where the water is leaking and with the cullar engrave along the outer edge. Remove excess film and lightly dab up any residual water. Check if there are still air bubbles and in case remove with the help of the spatula.
Small Tips
The application of Artesive glass films is very easy. It is necessary to wet the glass with soapy water, apply the film and remove the water underneath with the special spatula. Inside the package you will find the complete instructions that guide you step by step, for an easy and quick application.


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Free delivery for orders over 100€

Need a free sample to test the color? Get it here

roberto sacchetti - programmatore wordpress
Shopping Cart
There are no products in the cart!
Continue Shopping