Artesive Glass Series – G-01 Matt Basic

SKU: ART-G-01 Category:

From
4.49

How to order your adhesive film?

Quantity:
Free shipping for orders over 120 €
Prompt delivery, shipped within 24/48 hours
30 Days Easy Return
Do you need free samples to check the color? Click here

Description

Matt Basic

The Matt Basic model has a medium blurring intensity. The semi-transparent shades glimpse the outlines of things or a short drive people while still providing protection from the view that increases with the distance from the glass. At the distance of one meter is not possible to understand what is on the other side of the glass. This model lets the light in an optimal way. One of the images shows a comparison with uncoated glass.

Choose your Roll

Choose the width you need to minimize waste and facilitate application. You can choose between the various pre-cut rolls or the customized roll by indicating in the quantity field the exact meters required. This model is available in 2 different widths. 50 cm and 100 cm.

Glass Series

With Glass Series Artesive wants to introduce our window films, for decoration and privacy, for use on all glass and transparent surfaces (ie. Plexiglass). Ideal for your privacy protection, it also create a decorative effect on home and office windows. The Glass series window films also offer protection in case of accidental glass breakage. It is also possible to cut the window film to a shape or design using a standard vinyl cutter.

Blurring your glass has never been so easy

Easy application thanks to PVC increased thickness and length are the two cornerstones of the Glass Series The product is suitable for many applications in the home and in commercial spaces, perfect to let in natural light while obscuring from view. There are various levels of obscurity depending on which model you choose.

See the diagram below for some of the performance normally required by an adhesive coating for interiors. On a scale of 0 to 100 where 100 is the highest score, you can figure out which model is suitable for your use.

Performance Glass Serie Basic Matt

70%
80%
80%
90%
70%
100%
20%
80%

Features Glass Serie Basic Matt

Privacy

Blur your windows and make them privacy proof, leaving the filtering of natural light

Easy

Thanks to the increased thickness, the Glass series films are easier to apply, just follow the instructions for a quick and easy installation.

Shatterproof Protection

Thanks to the Glass Series film, the risk of splintering decreases in the event of accidental glass breakage.

Plotterable

90 micron thick curtains also suitable for cutting. A way to create drawings and written pre-spaced, giving a further aspect to the chart window film.

After taking measurements of the surface of the glass to be coated, cut the film using the measurement grid on the back, leaving at least 5cm of margin at each side.
Wipe the surface to be coated with a cloth, removing any imperfections and dirt which, in contact with the film, could cause imperfections.
Using a sprayer containing a solution of water and diluted neutral soap (10ml per liter of water), wet the glass to be coated thoroughly.
Remove the back paper of your Artesive glass film. While removing the film, moisten the adhesive part, always using the sprayer with the soapy water solution to prevent the film from sticking anywhere. Do not be afraid to moisten the film too much.
Apply the dampened film on the glass surface, leaving at least 5 cm of margin on all sides. Thanks to the wet glass the film will not immediately make adhesion and will allow you to move it without difficulty. Do not worry about any bubbles but focus only on positioning.
Hold the film firmly with one hand, using the Robin trowel or a soft spatula, remove the underlying water from the center of the surface to the outside. Follow the pictogram arrows and make sure to completely remove the water. During this phase also the possible air bubbles join the drops of water and are easily removed.
Dry with a cloth along the edges of the surface where the water is leaking and with the cullar engrave along the outer edge. Remove excess film and lightly dab up any residual water. Check if there are still air bubbles and in case remove with the help of the spatula.

The application of Artesive glass films is very easy. It is necessary to wet the glass with soapy water, apply the film and remove the water underneath with the special spatula. Inside the package you will find the complete instructions that guide you step by step, for an easy and quick application.

Sign up to our newsletter

To take advantage of promotions and exclusive offers! By subscribing you agree to our Terms, Privacy & Cookies Policy.