Artesive Magnum Primer – Adhesion promoter for self-adhesive films

Description

• Artesive MAGNUM Primer is an adhesion promoter designed for rigid plastic substrates and pressure-applied adhesive films.Thanks to the special components this solvent-based primer creates, once dry, a thin transparent film that allows the adhesive film to increase its adhesion if applied correctly.Preferably suitable for plastic surfaces such as ABS, polyester, polycarbonate and similar, metal and painted surfaces. It also lends itself to rigid supports such as laminates and ennobled surfaces.Artesive MAGNUM Primer should only be used in the points of greatest tension, such as edges, corners or points where a greater grip of the film is required. It should not be used on the entire surface but only in specific points.Using MAGNUM Primer is easy.
  1. clean the surface on which to apply the primer
  2. using the included swab or a brush spread the primer on the affected area. No need to dilute, the primer is ready to use.
  3. wait 2/3 minutes until the surface is completely dry (the solvent part must volatilize)
  4. proceed with the application of the film by applying the correct pressure, using the heat gun to increase its adhesion if necessary

  Technical Characteristics Magnum Primer:

  – Content: 70ml / 120ml / 240ml.

  – Application: with a swab or brush, no dilution is required

  – Color: transparent

  – Drying time: 4/5 minutes, depending on the surface and ambient temperature.

  – Application on:, plastic surfaces such as ABS, polyester, polycarbonate and similar, metal and painted surfaces. It also lends itself to rigid supports such as laminates and ennobled surfaces.

  – Concentrated, no need to dilute.

  Usage Warnings:

OPENING THE JAR COULD CAUSE SPLASHES PROTECT YOUR EYES

USE PROTECTIVE GOGGLES DURING USE
WEAR A MASK TO PROTECT THE RESPIRATORY TRACT

• • Wear protective gloves during application
  • Wear a protective mask during application
  • Keep out of reach of children
  • Do not swallow.
  • Dispose of the empty container properly.
  • Highly flammable liquid and vapor.
  • Causes skin irritation.
  • Causes serious eye irritation.
  • Flammable liquids Highly flammable liquid and vapor.
  • Skin corrosion / irritation Causes skin irritation.
  • Causes serious eye irritation.
  • It can cause drowsiness or dizziness.
  • Aspiration hazard May be fatal if swallowed and enters airways.
  • Hazardous to the aquatic environment Toxic to aquatic life with long lasting effects.
  • If you need to consult a doctor, have the container or the product label available.
  • Keep out of reach of children.
  • Keep away from heat sources, hot surfaces, sparks, open flames or other sources of ignition. Not smoking.
  • Use only outdoors or in a well-ventilated area.
  • IF SWALLOWED: Immediately call a POISON CENTER or doctor.
  • Consult the safety data sheet clicking here