Artesive Wood Series – WD-002 Dark Grey Oak

SKU: ART-WD-002 Category:

from 3,49

Free shipping on orders over 100 €

Normally shipped within 24/48 hours

30 day Easy Return

Clear
Clear

Free shipping on orders over 100 €

Normally shipped within 24/48 hours

30 day Easy Return

Dark Grey Oak

The model Dark Grey Oak has a base color on dark grey, with wood grain in relief and contrasts whitish / gray. The opaque finish has graining in a vertical direction relative to the length of the coil.

Choose your Roll

Choose the width you need to minimize waste and facilitate application. You can choose between the various pre-cut rolls or the customized roll by indicating in the quantity field the exact meters required. This model is available in 4 different widths. 30 cm, 60 cm, 90 cm and 122 cm.

Wood Series

The Artesive wood series is the perfect combination of materials, design and performance of application. This self-adhesive film made of PVC offers very special features, perfect to be used to coat surfaces such as wood, plastic, metal and smooth surfaces such as plasterboard or MDF. It’s surface has high thickness allowing a good feeling to the touch as well as sight. The grain feel and look  very similar to natural wood.

Quality and Easy Application

Like all Artesive self-adhesive films, including this wood series, are conformable, in which heating them allows you to model and apply them easily in tricky areas such as edges or corners. The adhesive being used is not set immediately to 100%, but allows you to remove the film and reposition it in the event of errors. Patterns and textures Series of Wood Artesive are in line with the trends of furniture of the moment.

See the diagram below for some of the performance normally required by an adhesive coating for interiors. On a scale of 0 to 100 where 100 is the highest score, you can figure out which model is suitable for your use.

Performance of Wood Series

  • Touch Feeling 80% 80%
  • Ease of Application 60% 60%
  • Conformability 80% 80%
  • Bonded Seal 80% 80%
  • Internal Use 100% 100%
  • External Use 70% 70%
  • Suitable for Car Wrapping 40% 40%
  • Resistance to Cleaning agents 70% 70%

Main Features of Wood Series

Conformable

With the change in temperature the film stretches and allows the installer to make it stick even in difficult spots such as corners or edges.

Design

Realistically texture similar to real wood. Thanks to the increased thickness of the grain feel a lot more touch than films of other brands.

Bubble Free System

Thanks to the special composition and to the thickness of the upper, it is possible to drastically reduce the irritating air bubbles during the application.

Unimmediate fixing

The adhesive of Artesive vinyl films does not have the bite immediately to allow the immediate detachment and repositioning on the surface.

How to apply the self-adhesive film
The application of the film is usually done step by step. After taking the measurements, the necessary part is cut, leaving always a margin of tolerance. On the back of the film, a grid helps you make a precise and in-line cut.
The film is repositionable at first, so do not be afraid to make mistakes. To help you first wet the surface to be treated with water, it will help you not to immediately attack the film.
Once cut to size, the film is still placed with the protective sheet applied on the surface, stopping it with paper tape. Starting from one side only a small part of the adhesive protection is removed and glued to the surface.
Any air bubbles can be removed with the help of a spatula. When the first piece of film is applied, the paper protection sheet is removed step by step.
Do not remove everything, but one piece at a time, continuing to pass the spatula every time from the center to the outside removing air bubbles and any drops of water previously applied. When the application is complete remove the pieces of paper tape. Voilà, done!
Small Tips
  • If you need to make large surfaces, we suggest you to buy a small test roll, or a single roll, to verify that your imagination and color are exactly the ones you were looking for.
  • It is always better to apply the film lightly initially, to be sure of the correct positioning.
  • If you need larger films with larger sizes, you can contact us for a specific quote.
Technical specifications
  • Material: Polypropylene (PVC)
  • Thickness: 200 μ ± 10%
  • Narrowing margin: 2% ca
  • Minimum class of reation to fire: NPD does not fireproof material
  • Product term applied inside: min 5 years
  • Product term applied to the outside: ND
  • Repositionnable: No
  • Adhesive: Permanent acrylic.
  • Heat resistance: 180 ° C
  • Application method: dry
  • Optimal Application temperature: 15/30°C
  • Liner Material: Kraft thickness120 μ±10%
  • Certification: UNI EN 12149:1999
  • Warranty: 3 years internal use only
Download the data sheet and warranty
Download the data sheet and warranty

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Free delivery for orders over 100€

Need a free sample to test the color? Get it here

Shopping Cart
There are no products in the cart!
Subtotal
0,00
Total
0,00
Continue Shopping