Artesive Stone Series – ST-06 Polished Pink Marble

SKU: ART-ST-06 Category:

Product available on request

This texture is available only upon request at the moment.

It means that it is possible to send a request for the production of the indicated color but a confirmation from our part is necessary and there may be time and quantity constraints. Upon request, you will be contacted by our production department.

Polished Pink Marble

At the moment this model is available on request. Send your request for more information on the specific texture. The Pink Marble model resembles in every way the texture real marble, with its explosion of grain and designs are consistent with those of the material in nature. The surface is smooth deliberately to create even the same feeling as real marble.

Stone Series

The Artesive Stone series is dedicated to the self-adhesive films like stone. It is the perfect combination of materials, design and performance of application. This self-adhesive film is made of PVC which offers very special features, perfect to be used to coat surfaces such as wood, plastic, metal and smooth surfaces such as plasterboard or MDF.

Quality and Easy Application

Like all Artesive self-adhesive films, including this Stone series are conformable, in which heating them allows you to model and apply them easily in tricky areas such as edges or corners. The adhesive being used is not set immediately to 100%, but allows you to remove the film to be repositioned in the event of errors. The patterns and textures of the Artesive Stone series is in line with the trends of furniture of the moment.

See the diagram below for some of the performance normally required by an adhesive coating for interiors. On a scale of 0 to 100 where 100 is the highest score, you can figure out which model is suitable for your use.

Performance of Stone Series

  • Touch Feeling 40% 40%
  • Ease of Application 60% 60%
  • Conformability 80% 80%
  • Bonded Seal 80% 80%
  • Internal Use 100% 100%
  • External Use 40% 40%
  • Suitable for Car Wrapping 20% 20%
  • Resistance to Cleaning agents 70% 70%

Main Features of Stone Series


With the change in temperature the film stretches and allows the installer to make it stick even in difficult spots such as corners or edges.


This texture is not smooth but embossed so even to the touch you feel a relief that gives an effect similar to the real material.

Bubble Free System

Thanks to the special composition and to the thickness of the upper, it is possible to drastically reduce the irritating air bubbles during the application.

Unimmediate fixing

The adhesive of Artesive vinyl films does not have the bite immediately to allow the immediate detachment and repositioning on the surface.

How to apply the self-adhesive film
The application of the film is usually done step by step. After taking the measurements, the necessary part is cut, leaving always a margin of tolerance. On the back of the film, a grid helps you make a precise and in-line cut.
The film is repositionable at first, so do not be afraid to make mistakes. To help you first wet the surface to be treated with water, it will help you not to immediately attack the film.
Once cut to size, the film is still placed with the protective sheet applied on the surface, stopping it with paper tape. Starting from one side only a small part of the adhesive protection is removed and glued to the surface.
Any air bubbles can be removed with the help of a spatula. When the first piece of film is applied, the paper protection sheet is removed step by step.
Do not remove everything, but one piece at a time, continuing to pass the spatula every time from the center to the outside removing air bubbles and any drops of water previously applied. When the application is complete remove the pieces of paper tape. Voilà, done!
Small Tips
  • If you need to make large surfaces, we suggest you to buy a small test roll, or a single roll, to verify that your imagination and color are exactly the ones you were looking for.
  • It is always better to apply the film lightly initially, to be sure of the correct positioning.
  • If you need larger films with larger sizes, you can contact us for a specific quote.
Technical specifications
  • Material: Polypropylene (PVC)
  • Thickness: 200 μ ± 10%
  • Narrowing margin: 2% ca
  • Minimum class of reation to fire: NPD does not fireproof material
  • Product term applied inside: min 5 years
  • Product term applied to the outside: ND
  • Repositionnable: No
  • Adhesive: Permanent acrylic.
  • Heat resistance: 180 ° C
  • Application method: dry
  • Optimal Application temperature: 15/30°C
  • Liner Material: Kraft thickness120 μ±10%
  • Certification: UNI EN 12149:1999
  • Warranty: 3 years internal use only
Download the data sheet and warranty
Download the data sheet and warranty
roberto sacchetti - programmatore wordpress
Shopping Cart
There are no products in the cart!
Continue Shopping