Artesive Plain Series – MA-018 Water Blue Matt

SKU: ART-MA-018 Category:

Product available on request

This texture is available only upon request at the moment.

It means that it is possible to send a request for the production of the indicated color but a confirmation from our part is necessary and there may be time and quantity constraints. Upon request, you will be contacted by our production department.

Water Blue Matt

At the moment this model is available on request. Send your request for more information on the specific texture.

Plain Matt Series

The Artesive Plain Series represents all solid models. This adhesive self-adhesive film made of PVC offers very special features, perfect to be used to coat surfaces such as wood, plastic, metal and smooth surfaces such as plasterboard or MDF.

The choice of solid self-adhesive films are smooth, without streaks. The matt effect provides a porous feeling to the touch.

Quality and Easy Application

Like all Artesive self-adhesive films, including this Plain series are conformable, in which heating them allows you to model and apply them easily in tricky areas such as edges or corners. The adhesive being used is not set immediately to 100%, but allows you to remove the film to be repositioned in the event of errors. Patterns and textures of the series of Plain Artesive are in line with the trends of furniture of the moment.

See the diagram below for some of the performance normally required by an adhesive coating for interiors. On a scale of 0 to 100 where 100 is the highest score, you can figure out which model is suitable for your use.

Plain Series Performance

  • Touch Feeling 50% 50%
  • Ease of Application 60% 60%
  • Conformability 80% 80%
  • Bonded Seal 80% 80%
  • Internal Use 100% 100%
  • External Use 70% 70%
  • Suitable for Car Wrapping 40% 40%
  • Resistance to Cleaning agents 70% 70%

Main Features of Plain Series

Conformable

With the change in temperature the film stretches and allows the installer to make it stick even in difficult spots such as corners or edges.

Bubble Free System

Thanks to the special composition and to the thickness of the upper, it is possible to drastically reduce the irritating air bubbles during the application.

Unimmediate fixing

The adhesive of Artesive vinyl films does not have the bite immediately to allow the immediate detachment and repositioning on the surface.

How to apply the self-adhesive film
The application of the film is usually done step by step. After taking the measurements, the necessary part is cut, leaving always a margin of tolerance. On the back of the film, a grid helps you make a precise and in-line cut.
The film is repositionable at first, so do not be afraid to make mistakes. To help you first wet the surface to be treated with water, it will help you not to immediately attack the film.
Once cut to size, the film is still placed with the protective sheet applied on the surface, stopping it with paper tape. Starting from one side only a small part of the adhesive protection is removed and glued to the surface.
Any air bubbles can be removed with the help of a spatula. When the first piece of film is applied, the paper protection sheet is removed step by step.
Do not remove everything, but one piece at a time, continuing to pass the spatula every time from the center to the outside removing air bubbles and any drops of water previously applied. When the application is complete remove the pieces of paper tape. Voilà, done!
Small Tips
  • If you need to make large surfaces, we suggest you to buy a small test roll, or a single roll, to verify that your imagination and color are exactly the ones you were looking for.
  • It is always better to apply the film lightly initially, to be sure of the correct positioning.
  • If you need larger films with larger sizes, you can contact us for a specific quote.
Technical specifications
  • Material: Polypropylene (PVC)
  • Thickness: 200 μ ± 10%
  • Narrowing margin: 2% ca
  • Minimum class of reation to fire: NPD does not fireproof material
  • Product term applied inside: min 5 years
  • Product term applied to the outside: ND
  • Repositionnable: No
  • Adhesive: Permanent acrylic.
  • Heat resistance: 180 ° C
  • Application method: dry
  • Optimal Application temperature: 15/30°C
  • Liner Material: Kraft thickness120 μ±10%
  • Certification: UNI EN 12149:1999
  • Warranty: 3 years internal use only
Download the data sheet and warranty
Download the data sheet and warranty

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.